Menu
The technical specifications of the two large-format Omni 3D printers are compared in the table below.
| Specification / Model | Omni LITE | Factory 2.0 NET |
| Build volume XYZ | 460 x 460 x 600mm | 500 x 500 x 575mm |
| Dual heads | Yes | Yes |
| Up to 3Kg spools | Yes | Yes |
| Auto head adjustment | NO | YES |
| Liquid cooled extruder | NO | YES |
| Filament flow sensor | NO | YES |
| Head temps | 260, 360 deg C | 260, 360, 500 deg C |
| Heated bed | 130 deg C | 170 deg C |
| Heated chamber | NO | 70 deg C |
| SD Card | Yes | Yes |
| Bed material | Ceramic | Ceramic |
| Auto bed levelling | Yes | Yes |
| Interlock | NO | YES |
| On board IP camera | NO | YES |
| Remote monitoring s/w | Yes | Yes |
| Print after power out | Yes | Yes |
| Password control | Yes | Yes |
| IT architecture | 32-bit | 32-bit |
| Full build in PLA | Yes | Yes |
| Full build in ABS | Yes * | YES |
| Full build in PA-CF | Yes * | YES |
| Full build in HT materials | NO | Yes * |
| Ethernet Network | Yes | Yes |
| Wifi | Yes | Yes |
| UPS spec | 1000W | 360W |
* dependent on part size and geometry
For a greater choice of FFF printers, please see:-
FFF 3D Printer Selection Chart
