ABS RAIL EN45545 [Omni 1.75mm] 1Kg

ABS V0 advanced resin meets the requirements of EN 45545-2, R22, R23, HL1, HL2

Density kg/m3 1180 ISO 1183B

Printer settings:-

• sets extruder temp °C 260–280 internal
• plate temp °C 90–110 internal
• min. nozzle diameter mm 0.4 internal
• fan % 0–20 internal
• print speed mm/1° 25-35 internal

Mechanical properties:-

• Length at Break (50 mm/min) MPa 54 ISO 527-2
• Tensile elongation at Break (50 mm/min) % 120 ISO 527-2
• Tensile Modulus (1 mm/min) MPa 2700 ISO 527-2
• Flexural Modulus (2 mm/min) MPa 2750 ISO 178
• Charpy notched impact (23°C) kJ/m² 46 ISO
• Charpy notched impact (-30°C) kJ/m² 13 ISO 179/1eA

Thermal properties:-

• Deflection Temp. under load 1.8 MPa °C 80 ISO 75-A
• Vicat softening temp. °C 100 ISO 306-B50

Electrical properties:-

• Relative Permittivity 100Hz – 3.2 IEC 60250
• Relative Permittivity 1MHz – 3.1 IEC 60250
• Dissipation Factor 100Hz – 5E-03 IEC 60250
• Dissipation Factor 1MHz – 7E-03 IEC 60250
• Surface Resistivity Ohms 1.0E+16 IEC 60093
• Volume Resistivity Ohm·cm 1.0E+16 IEC 60093
• Dielectric Strength kV/mm 30 IEC 60243
• Comparative Tracking Index V 300 IEC 60112

Flammability ratings:-

• Classification at 1.5mm – V0 UL 94
• Classification at 2mm – 5VB UL 94
• Classification at 3mm – 5VA UL 94
• Glow Wire Index °C 960 IEC 60695-2-12
• Limiting Oxygen Index % 32 ISO 4589-2