Menu
iSLM 160 Metal 3D Printer Pack – Each machine comes with auxiliary equipment, installation, training and 50Kg of iSLM Powder Material – Stainless Steel 316L.
Print Volume: 160 x 160 x 210 mm
Laser Watt: 500W
Use with Build Volume Reducer Small
Ask us about our other iSLM 160 packages!
| Technology | SLM, LPBF |
| Build volume | 160 x 160 x 200mm |
| Layer thickness | 0.02-0.10 mm |
| Material type | Metal |
| Materials include | Choice of 7+ metals |
| Software | 3DXpert, 3D Layer |
| Attributes | High speed, high accuracy, reliable. |
Our other packages include:
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
ZRapid is using a high energy and fine spot laser, The equipment can complete complex parts in a very short period time while using conventional methods that will take several weeks or even months to complete in comparison. Parts not only have precise dimension, high tensile and high density, but also excellent in mechanical properties. Mainly used for rapid production of high-precision, high quality metal parts.
| Materials: | Stainless Steel( 316L ) Aluminium Alloy( AlSi₁₀Mg ) Titanium Alloy( TC4 ) Co-Cr Alloy( MP1 ) Die Steel( MS1 ) Cuprum( Cu ) |
ZRapid SLM 3D Printers
| LASER SYSTEM | Type: Fiber laser Wavelength: 1064nm Power: 200W / 500W |
| RECOATING SYSTEM | Process: Scraper paving Normal Build: 0.05mm Quick Build: 0.05~0.10mm Precision Build: 0.02~0.05mm |
| OPTICAL & SCANNING | Beam: (diameter@1/e2) 0.04~0.15mm Scanning Galvanometer: High Speed Scanning Galvanometer Parts Scanning Speed: 1.0~2.0m/s (recommended) Blank Jumping Speed: 10.0m/s (recommended) Reference Building Speed: 2~15cm³/h |
| SHIELD SYSTEM | Protective Gas: N2 / Ar(Active metal materials must be protected with Ar) Flow Control: 0~3 L/min intellient adjustment Dust Extraction Control: High efficiency Protection recycling system |
| BUILD VAT | Volume: Approx. 5L XY Platform: 160mm(X) × 160mm(Y) Z Axis: 230mm(Including substrate thickness) Max Weight: 20kg Type: Precision resistor heater Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminium Alloy / Co-Cr Alloy / Nickel Alloy / Cuprum etc. |
| SOFTWARE | Network: Ethernet, TCP/IP, IEEE802.3 Control Software: iSLM(Presto SLM) Date Preparation Software: 3dLayer( 3D Model Supporting & Slicing Software ) Data Interface: CLI file, SLC file, STL file |
| INSTALLATION CONDITION | Power: 220V(±10%) AC 50/60Hz, single-phase, 5/20A Ambient Temperature: 20-26ºC Relative Humidity: Less than 40%, non-condensing Size: 1.10m(W)×1.30m(D)×1.85m(H) Weight: Approx. 1000kg |
| WARRANTY | Laser: 5000 hours or 12 months (whichever comes first) Main Machine: 12 months from installation date |
iSLM160 Metal 3D Printer
Our other packages include:
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
ZRapid is using a high energy and fine spot laser, The equipment can complete complex parts in a very short period time while using conventional methods that will take several weeks or even months to complete in comparison. Parts not only have precise dimension, high tensile and high density, but also excellent in mechanical properties. Mainly used for rapid production of high-precision, high quality metal parts.
| Materials: | Stainless Steel( 316L ) Aluminium Alloy( AlSi₁₀Mg ) Titanium Alloy( TC4 ) Co-Cr Alloy( MP1 ) Die Steel( MS1 ) Cuprum( Cu ) |
ZRapid SLM 3D Printers
| LASER SYSTEM | Type: Fiber laser Wavelength: 1064nm Power: 200W / 500W |
| RECOATING SYSTEM | Process: Scraper paving Normal Build: 0.05mm Quick Build: 0.05~0.10mm Precision Build: 0.02~0.05mm |
| OPTICAL & SCANNING | Beam: (diameter@1/e2) 0.04~0.15mm Scanning Galvanometer: High Speed Scanning Galvanometer Parts Scanning Speed: 1.0~2.0m/s (recommended) Blank Jumping Speed: 10.0m/s (recommended) Reference Building Speed: 2~15cm³/h |
| SHIELD SYSTEM | Protective Gas: N2 / Ar(Active metal materials must be protected with Ar) Flow Control: 0~3 L/min intellient adjustment Dust Extraction Control: High efficiency Protection recycling system |
| BUILD VAT | Volume: Approx. 5L XY Platform: 160mm(X) × 160mm(Y) Z Axis: 230mm(Including substrate thickness) Max Weight: 20kg Type: Precision resistor heater Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminium Alloy / Co-Cr Alloy / Nickel Alloy / Cuprum etc. |
| SOFTWARE | Network: Ethernet, TCP/IP, IEEE802.3 Control Software: iSLM(Presto SLM) Date Preparation Software: 3dLayer( 3D Model Supporting & Slicing Software ) Data Interface: CLI file, SLC file, STL file |
| INSTALLATION CONDITION | Power: 220V(±10%) AC 50/60Hz, single-phase, 5/20A Ambient Temperature: 20-26ºC Relative Humidity: Less than 40%, non-condensing Size: 1.10m(W)×1.30m(D)×1.85m(H) Weight: Approx. 1000kg |
| WARRANTY | Laser: 5000 hours or 12 months (whichever comes first) Main Machine: 12 months from installation date |
iSLM160 Metal 3D Printer
Our other packages include:
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
ZRapid is using a high energy and fine spot laser, The equipment can complete complex parts in a very short period time while using conventional methods that will take several weeks or even months to complete in comparison. Parts not only have precise dimension, high tensile and high density, but also excellent in mechanical properties. Mainly used for rapid production of high-precision, high quality metal parts.
| Materials: | Stainless Steel( 316L ) Aluminium Alloy( AlSi₁₀Mg ) Titanium Alloy( TC4 ) Co-Cr Alloy( MP1 ) Die Steel( MS1 ) Cuprum( Cu ) |
ZRapid SLM 3D Printers
| LASER SYSTEM | Type: Fiber laser Wavelength: 1064nm Power: 200W / 500W |
| RECOATING SYSTEM | Process: Scraper paving Normal Build: 0.05mm Quick Build: 0.05~0.10mm Precision Build: 0.02~0.05mm |
| OPTICAL & SCANNING | Beam: (diameter@1/e2) 0.04~0.15mm Scanning Galvanometer: High Speed Scanning Galvanometer Parts Scanning Speed: 1.0~2.0m/s (recommended) Blank Jumping Speed: 10.0m/s (recommended) Reference Building Speed: 2~15cm³/h |
| SHIELD SYSTEM | Protective Gas: N2 / Ar(Active metal materials must be protected with Ar) Flow Control: 0~3 L/min intellient adjustment Dust Extraction Control: High efficiency Protection recycling system |
| BUILD VAT | Volume: Approx. 5L XY Platform: 160mm(X) × 160mm(Y) Z Axis: 230mm(Including substrate thickness) Max Weight: 20kg Type: Precision resistor heater Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminium Alloy / Co-Cr Alloy / Nickel Alloy / Cuprum etc. |
| SOFTWARE | Network: Ethernet, TCP/IP, IEEE802.3 Control Software: iSLM(Presto SLM) Date Preparation Software: 3dLayer( 3D Model Supporting & Slicing Software ) Data Interface: CLI file, SLC file, STL file |
| INSTALLATION CONDITION | Power: 220V(±10%) AC 50/60Hz, single-phase, 5/20A Ambient Temperature: 20-26ºC Relative Humidity: Less than 40%, non-condensing Size: 1.10m(W)×1.30m(D)×1.85m(H) Weight: Approx. 1000kg |
| WARRANTY | Laser: 5000 hours or 12 months (whichever comes first) Main Machine: 12 months from installation date |