Professional 3D TECH | ADDITIVE Products & Services

Log in

iSLM 280 Metal

islm280

iSLM 280 Metal

iSLM280 Metal 3D Printer Pack – Each machine comes with auxiliary equipment, installation, training and 300Kg of Stainless Steel 316L Powder Material

Print Volume: 280 x 280 x400 mm

Laser Watt: 500W

Use with the Large Build Volume Reducer

Ask us about our other iSLM2880 packages!

SKU SLM-280 Category Tags , , Brand:

Product description

iSLM280 Metal 3D Printer

SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.

ZRapid is using a high energy and fine spot laser, The equipment can complete complex parts in a very short period time while using conventional methods that will take several weeks or even months to complete in comparison. Parts not only have precise dimension, high tensile and high density, but also excellent in mechanical properties. Mainly used for rapid production of high-precision, high quality metal parts.

  • Fiber laser
  • Fast galvanometer
  • iSLM Control System
Materials:Stainless Steel( 316L ) Aluminium Alloy( AlSi₁₀Mg ) Titanium Alloy( TC4 ) Co-Cr Alloy( MP1 ) Die Steel( MS1 ) Cuprum( Cu )

KEY FEATURES

High speed · High precision · High quality

ZRapid SLM 3D Printers
  • Parts with high quality surface before polishing
  • Parts in high accuracy, for precision samples
  • Directly produce functional metal parts, simplify the manufacture process
  • Parts have metallurgy and mechanical properties, relative density higher than 99%. Post process is unnecessary
  • Parts can be printed within minutes to hours according to the size and complexity
  • Parts can be finished in minutes or hours based on the complexity
  • Directly produce functional complex geometric parts like snap-fit or loose joint hinge
  • Widely chosen materials, the metal powder could be single metal or alloy
  • Especially for single part or small amount of functional parts
Product Specifications
 

LASER SYSTEM

Type: Fiber laser

Wavelength: 1064nm

Power: 500W

RECOATING SYSTEM

Process: bi-directional scraper paving

Normal Build: 0.05mm

Quick Build: 0.05~0.15mm

Precision Build: 0.02~0.05mm

OPTICAL & SCANNING

Beam: (diameter@1/e2) 0.06~0.20mm

Scanning Galvanometer: High Speed Scanning Galvanometer

Parts Scanning Speed: 1.0~4.0m/s (recommended)

Blank Jumping Speed: 10.0m/s (recommended)

Reference Building Speed: 4~20cm³/h

SHIELD SYSTEM

Protective gas: N2 / Ar(Active metal materials must be protected with Ar)

Flow Control: 0~3 L/min intelligent adjustment

Dust Extraction Control: High efficiency Protection recycling system

BUILD VAT

Volume: Approx. 25L

XY Platform: 280mm(X) × 280mm(Y) (Screw hole, rounded, etc. are not calculated)

Z Axis: 380mm(Including substrate thickness)

Max Weight: 70kg

Type: Precision resistor heater

Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminium Alloy / Co-Cr Alloy / Nickel Alloy / Cuprum etc.

SOFTWARE

Network: Ethernet, TCP/IP, IEEE802.3

Control Software: iSLM(Presto SLM)

Date Preparation Software: 3dLayer

Data Interface: CLI file, SLC file, STL file

INSTALLATION CONDITION

Power: 220V(±10%) AC 50/60Hz, single-phase, 5/20A

Ambient Temperature: 20-26ºC

Relative Humidity: Less than 40%, non-condensing

Size: 1.75m(W)×1.40m(D)×2.20m(H)(Operating computer is not included)

Weight: Approx. 1800kg

WARRANTY

Laser: 5000 hours or 12 months (whichever comes first)

Main Machine: 12 months from installation date